Tieline Bridge-IT XTRA, User Manual

Page: 78 / 209

78 Bridge-IT XTRA Manual
© Tieline Pty. Ltd. 2015
Important Notes:
·
If you select Sessionless as the Session Protocol select UDP/IP +RTP for RFC-
compliant IP streaming.
· See RS232 Data Configuration for detailed information on RS232 data and see "Enabling
Relays and RS232 Data" for more information on relay operations.
6. Configure the IP address, ports, and then specify which streaming interface is used to dial this
connection, e.g. Primary ( LAN / ETHERNET port) or VLAN if configured. VLANs can be used to
configure separate control and streaming interfaces if required. Note: By default Any will select
Primary as the streaming interface.
Important Notes: The Remote Audio Port is the codec port at the remote end of the link
to which you are sending audio. The Local Audio Port is the port used by the local codec
to receive audio from the remote codec. When Tieline Codecs is the Session Protocol
selected (using Tieline sesssion data), the Local Audio Port is automatically configured as
UDP audio port 9000 by default. This is the default audio port used by all Tieline IP codecs
for the first audio stream connection. Click to deselect the
Automatic check-box to change
this setting.
When you select Sessionless as the Session Protocol the Session Port is not configurable and
you can manually configure the Remote Audio Port and Local Audio Port .