176
Bridge-IT XTRA Manual
© Tieline Pty. Ltd. 2015
"Tieline Codec" Port Configuration
If using the
Tieline Codec
setting for call establishment (i.e. Tieline session data is enabled),
you can also change the default audio ports if required.
·
The default value for the
Send
(audio)
Port
is 9000
·
The range of values for the
Send
Port
is 2000 to 65535
·
The default port value for the
Return
(audio)
Port
is
Automatic
. Note:
Automatic
indicates that the codec will allocate the return port value and send this information to
the codec to which you are dialing
·
The range of values for the
Return
Port
is 2000 to 65535
Sessionless Multicast Connections
For a sessionless multicast server connection:
·
Only the
Send
Port
is available
·
The default value for the port is 9000
·
The range of values for the port is 2000 to 65535
For a sessionless multicast client connection:
·
Only the
Return
Port
is available
·
The default value for the port is 9000
·
The range of values for the port is 2000 to 65535
19.8
Configuring QoS for Broadcasts
It is possible for IP networks to differentiate between and prioritise data packets being transmitted
through routers across networks. This is useful because in modern data networks many different IP
services like email, voice, web pages, video and streaming music coexist within the same network
infrastructure.
Prioritising IP Data Packets when Broadcasting
Broadcast IP audio data packets can be configured for expedited or assured forwarding (Quality of
Service or QoS) when traversing different networks. Routers can also be configured to ignore these
forwarding priorities so they are not assured across all networks.
The codec can be configured to prioritise IP data packets sent across a network by entering a value
into the Differentiated Services Code Point (DSCP) field within the header of data packets
transmitted by the codec over the network. Check with your IT administrator before changing this
setting. By default the codec is configured for Assured Forwarding and more details about DSCP are
available on Wikipedia at
http://en.wikipedia.org/wiki/Dscp
.
Configuring Bridge-IT for QoS
1. Press the
SETTINGS
button.
2. Use the navigation buttons to select
QoS
and press the
button.
3. Press the
button and use the
RETURN
button to delete numbers already entered,
then use the numeric
KEYPAD
to enter the new setting.
4. Press the
button to save the new setting.
Summary of Contents for Bridge-IT XTRA
Page 18: ...18 Bridge IT XTRA Manual Tieline Pty Ltd 2015 Codec Menu Overview...
Page 19: ...19 Tieline Pty Ltd 2015 Bridge IT XTRA Manual Connect Menu...
Page 20: ...20 Bridge IT XTRA Manual Tieline Pty Ltd 2015 IP Setup Menu Navigation...
Page 21: ...21 Tieline Pty Ltd 2015 Bridge IT XTRA Manual Settings Menu...
