Tieline Bridge-IT XTRA, User Manual

Page: 95 / 209

95
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
phones and are only configured for G.711 and GSM algorithms.
When you register an account with a SIP server you will be provided with:
· The SIP server IP address.
· A username (often the same as a SIP number).
· A password.
· Domain details.
· Realm details (sometimes).
Configure the Codec for SIP using the Web-GUI
Use the Toolbox web-GUI to program SIP account registration details into your codec. Once these
details have been entered into the codec, each time it is connected to a public IP address it will
contact the SIP server automatically to acknowledge its presence over a wide area network.
1. Connect your codec to a LAN connection with a public IP address, then login to the Toolbox
web-GUI and click the Settings symbol at the top of the screen to display the Settings
panel .
2. Click the SIP button.
3. Enter the account details into the relevant text boxes.
4. Enter the
Registration Timeout (this shouldn't need to be adjusted from the default setting).
5. Click to select Activate Account and click the Save Settings button to create the account
in the codec. Settings Saved is displayed in the bottom-left corner of the Settings panel if
the account details are saved successfully.
5. Navigate to SETTINGS > SIP > Accounts to verify that the account has been registered
to the SIP server. The registration symbol appears when it is activated successfully.
Important Notes: Some ISPs may block SIP traffic over UDP port 5060.