Tieline Bridge-IT XTRA, User Manual

Page: 33 / 209

33
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
2. Press the HOME button to return to the Home screen, select Connect and press the
button, then select IP and press the button.
3. Select your preferred IP Session mode. In this Peer-to-Peer connection example we have
selected Tieline , which uses Tieline session data, then press the button. Note: Select SIP
or Sessionless if these connections are required.
4. Use the numeric KEYPAD to enter the IP address of the codec you want to dial, using the or
buttons to enter the periods in the IP address. Use the RETURN button to delete
numbers already entered. Next, press the down navigation button to select Setup and press
.
Important Note: The codec remembers recent IP addresses just like a cell-phone. To
view these addresses just press the OK button when you select the Connect IP screen.
The most recent addresses and programs are listed first and you can use the navigation
buttons to scroll up and down. Press the
OK button to select the address you have
highlighted.
4. Press the down navigation button to select Algor'm (algorithm) and press .
5. Use the navigation buttons to select a preconfigured algorithm profile, or manually enter algorithm
settings, then press .