Tibbo GA1000 User Manual Download Page 550

Page: 550 / 560

534

Update History (for this Manual)



New

Type...End Type Statement

topic.



Updated

Passing Arguments to Procedures

topic (strict byref argument match

is now required).



Updated

Goto Statement

-- all labels are local!



New Supported Variable Types topics for each platform (

EM202

, EM1000).



Updated Platform-dependent Programming Information topics for each platform (

EM202

EM1000



EM202 platform no longer supports redirection --

Enum pl_redir

topic has

been updated.



Updated Supported Functions (Syscalls) for

EM202

and EM1000 platforms --

some stuff in, some stuff out.



Updated

Generating Dynamic HTML Pages

topic -- described changed behavior

when the same code snippet has to be executed from two instances of the same
HTML page being sent to the browser.



Updated

Httpnoclose Property

topic -- there is a new "separator" string.



Updated

Pat.play

and

Beep.play

topics -- now "**" means x4 speed.



New

Sys.onsystimerperiod Property

topic.



Updated

On_sys_timer Event

topic -- to reflect that there is a new

sys.

onsystimerperiod

property.



New

Sock.inconenabledmaster Property

topic.



Updated Accepting Incoming Connections topic -- added material regarding

sock.

inconenabledmaster

property.



Updated

topics because all four methods have been renamed.



New

topics.



Updated

Vali Function

topic -- this function is no longer available since

val

function now works both for word (unsigned) and short (signed) conversions.



Updated

Val Function

topic to reflect the fact that this function is now used

both for word (unsigned) and short (signed) conversions.



Updated

topics -- more accurate description and examples.



Added "declaration" to the description of all events.



Updated

sock.event R/O Property

and

sock.eventsimple R/O Property

topics -- these properties are not longer available.



Updated

On_sock_event Event

topic -- this event now carries newstate and

newstatesimple arguments that have replaced

sock.event

and

sock.

eventsimple

R/O properties.



Updated

Checking Connection Status

topic to reflect the changes made to the

on_sock_event



New

"Split Packet" Mode of TCP Data Processing

.Splittcppackets Property

and

On_sock_tcp_packet_arrival Event

topics.



Updated certain screenshots in several topics.



Added Image Editor topics:

Built-in Image Editor

Image Menu

Image

Editor Toolbar

Tool Properties Toolbars

(+ all subtopics).



Updated

Adding, Removing, and Saving Files

topic (added image editor-

related info).

134

136

145

136

134

320

335

386

389

220

337

381

382

390

391

190

194

197

199

200

209

210

207

208

190

195

210

332

292

343

306

355

344

119

122

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands

Tibbo GA1000, User Manual

Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands