Tibbo GA1000 User Manual Download Page 140 | Manualshive

Page: 140 / 560

background image

124

Development Environment

©2000-2008 Tibbo Technology Inc.

Transparency Mode: selects whether original image will
still be visible underneath the text. When the
transparency mode is OFF, original image will not be
visible. When the transparency mode is ON, original
image will be visible.

Inversion Mode: Toggles text tool's inversion mode on/
off. When inversion is OFF, the text will always be printed
in the fore-ground color. When inversion is ON, the text
will appear in fore-ground color over the areas originally
painted in background color and in background color over
the areas originally painted with non-background color.

Font Selector: Selects the font to print the text with.

Font Size: Selects the size of the font.

Bold: Toggles bold attribute for the font on/off.

Italic: Toggles italic attribute for the font on/off.

Underline: Toggles underline attribute for the font on/
off.

Left: Selects left alignment for the text (result is visible
with multi-line text only).

Center: Selects center alignment for the text (result is
visible with multi-line text only).

Right: Selects right alignment for the text (result is
visible with multi-line text only).

Line Tool Properties

Inversion Mode: Toggles line tool's inversion mode on/off.
When inversion is OFF, the line will always be drawn in the
fore-ground color. When inversion is ON, the line will appear
in fore-ground color over the areas originally painted in
background color and in background color over the areas
originally painted with non-background color.

Size: Line width in pixels.

Rectangle Tool Properties

«
...
138
139
140
141
142
...
»

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GA1000

Brand: D-Link Pages: 12

Brand: LaCie Pages: 44

LaCie Ethernet Disk

Brand: LaCie Pages: 2

12big Rack Fibre 8

Brand: LaCie Pages: 9

Brand: WAGO Pages: 2

Brand: Teknim Pages: 10

TE100-S16 - 10/100Mbps Ethernet Switch

Brand: TRENDnet Pages: 15

Brand: 4G Systems Pages: 2

Brand: BHU NETWORKS Pages: 75

Blue Gate ISDN BRI Brave

Brand: Alphatech Pages: 6

DynaGST/2402G GEP-33224T-1

Brand: UNICOM Pages: 17

Brand: Allied Telesis Pages: 128

Brand: Adeunis RF Pages: 9

Brand: D-Link Pages: 4

Brand: D-Link Pages: 13

Brand: D-Link Pages: 13

Brand: D-Link Pages: 2

Brand: VegaStream Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands