246
Platforms
©2000-2008 Tibbo Technology Inc.
reaching its destination even in case of
,
however, will still be detected in the incoming data stream.
8.3.2.3
Properties, Methods, Events
This section provides an alphabetical list of all properties, methods, and events of
the ser object. For your convenience, here is a hierarchical map of the serial port's
events, properties and methods.
All properties, methods, and events under
are shown as sub-nodes of
this property because they refer to a serial port currently selected by the ser.num.
The
method
because this method needs to be called each time you want to receive the
_on_ser_data_sent.
,
,
, and
are subordinate to ser.enabled because they can be changed (or have effect) only
when ser.enabled= 0- NO (the sys.buffalloc method is not a part of the ser object
but its use is required for normal serial port operation- this is why it is listed here).
are
only relevant in the UART mode of operation.
is only relevant when ser.esctype is not DISABLED.
245
236
257
258
257
249
261
217
260
255
248
260
249
251
255
251