Tibbo GA1000 User Manual Download Page 142

Page: 142 / 560

126

Development Environment

Zoom Tool Properties

Zoom Level: Selects one of available zoom (magnification)
levels.

Status Bar

Below is a screenshot of the status bar:

Target: Shows selected debug transport and target
address (in this case, MAC address).

Progress Bar: Shows progress during long operations
(uploading binary, etc).

Communication State indicator: Covered under

Target States

above.

Target State indicator: Covered under

Target

States

above.

Timer: Covered under

Code Profiling

above.

Cursor location: Lines and columns.

CAP, NUM, SCRL: Status indicators for Caps Lock,
Num Lock and Scroll Lock.

Dialogs

Not all dialogs are reviewed -- only the ones which are not self-explanatory.

In this section:



Project Settings



New Project



Add file to Project



Graphic File Properties Dialog

127

128

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands

Tibbo GA1000, User Manual

Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands