Tibbo GA1000 User Manual Download Page 549

Page: 549 / 560

533

TIDE and Tibbo BASIC User Manual



Expanded

Establishing Outgoing Connections

and

Closing Connections

topics. Both topics now contain "Do not forget! Connection Handling is fully
asynchronous" sections.



Added "Socket re-use after connection closing" section to the

Closing

Connections

topic.



New

More On the Socket's Asynchronous Nature

topic.

----------------

12FEB2007 release



Updated

Adding, Removing, and Saving Files

topic.



Added

Graphic File Properties Dialog

topic.



Updated

Working With HTML

topic.



Significantly expanded

Embedding Code Within an HTML File

topic --

especially important: all code fragments on the HTML page are parts of one
procedure.



Updated

Using HTTP

Generating Dynamic HTML pages

, and

Working With

HTTP Variables

topics.

----------------

27DEC2006 release



Added "What's new in R2" and "Migration From Version 1" topics.



Updated

The Watch

-- described new functionality, provided more info on how

watch works.



Scopes in Watch topics

-- provided more info on how watch works.



Updated Using the

Project Browser

-- selected platform is now visible in the

topmost tree node.



Updated

Program Structure

-- explained that event handlers can also accept

arguments.



New

Exceptions

topic



Updated

Variables and Their Types

-- added info about dword, long, real,

float, and structures.



Updated

Type Conversion

-- almost 100% new text.



New

Type Conversion in Expressions

-- this section has been "under

construction" for a long time.



New

Compile-time Calculations

topic.



Updated

Arrays

topic -- new ways to declare, etc.



New

Structures

topic.



Updated and renamed "User-defined Types" topic. Now it is called

Enumeration

Types



Updated

Understanding the Scope of Variables

topic.



New

Declaring Variables

topic.



Updated

Introduction to Procedures

-- explained that event handlers can also

accept arguments and can never be functions procedures.



Updated

Dim Statement

topic -- new data about ways to define array

variables.

287

290

294

128

314

320

323

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands

Tibbo GA1000, User Manual

Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands