Tibbo GA1000 User Manual Download Page 159

Page: 159 / 560

143

TIDE and Tibbo BASIC User Manual

the RX/W0&1in/din input of the serial port 3.

15- PL_IO_NUM_15_TX3

(2)

General-purpose I/O line 15 (P1.7). This line is also
the TX/W1out/dout output of the serial port 3.

16- PL_IO_NUM_16_INT0:

General-purpose I/O line 16 (P2.0).

17- PL_IO_NUM_17_INT1:

General-purpose I/O line 17 (P2.1).

18- PL_IO_NUM_18_INT2:

General-purpose I/O line 18 (P2.2).

19- PL_IO_NUM_19_INT3:

General-purpose I/O line 19 (P2.3).

20- PL_IO_NUM_20_INT4:

General-purpose I/O line 20 (P2.4).

21- PL_IO_NUM_21_INT5:

General-purpose I/O line 21 (P2.5).

22- PL_IO_NUM_22_INT6:

General-purpose I/O line 22 (P2.6).

23- PL_IO_NUM_23_INT7:

General-purpose I/O line 23 (P2.7).

24- PL_IO_NUM_24:

General-purpose I/O line 24 (P3.0).

25- PL_IO_NUM_25:

General-purpose I/O line 25 (P3.1).

26- PL_IO_NUM_26:

General-purpose I/O line 26 (P3.2).

27- PL_IO_NUM_27:

General-purpose I/O line 27 (P3.3).

28- PL_IO_NUM_28:

General-purpose I/O line 28 (P3.4).

29- PL_IO_NUM_29:

General-purpose I/O line 29 (P3.5).

30- PL_IO_NUM_30:

General-purpose I/O line 30 (P3.6).

31- PL_IO_NUM_31:

General-purpose I/O line 31 (P3.7).

32- PL_IO_NUM_32:

General-purpose I/O line 32 (P4.0).

33- PL_IO_NUM_33:

General-purpose I/O line 33 (P4.1).

34- PL_IO_NUM_34:

General-purpose I/O line 34 (P4.2).

35- PL_IO_NUM_35:

General-purpose I/O line 35 (P4.3).

36- PL_IO_NUM_36:

General-purpose I/O line 36 (P4.4).

37- PL_IO_NUM_37:

General-purpose I/O line 37 (P4.5).

38- PL_IO_NUM_38:

General-purpose I/O line 38 (P4.6).

39- PL_IO_NUM_39:

General-purpose I/O line 39 (P4.7).

40- PL_IO_NUM_40:

General-purpose I/O line 40 (does not belong to any
8-bit port).

41- PL_IO_NUM_41:

General-purpose I/O line 41 (does not belong to any
8-bit port).

42- PL_IO_NUM_42:

General-purpose I/O line 42 (does not belong to any
8-bit port).

43- PL_IO_NUM_43:

General-purpose I/O line 43 (does not belong to any
8-bit port).

44- PL_IO_NUM_44:

General-purpose I/O line 44 (does not belong to any
8-bit port).

45- PL_IO_NUM_45_CO

(3)

General-purpose I/O line 45 (does not belong to any
8-bit port). This line is also used by the

beep

object to generate square wave output that is
primarily intended for driving beeper (buzzer).

46- PL_IO_NUM_46:

General-purpose I/O line 46 (does not belong to any
8-bit port).

47- PL_IO_NUM_47:

General-purpose I/O line 47 (does not belong to any

387

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands

Tibbo GA1000, User Manual

Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands