Tibbo GA1000 User Manual Download Page 138 | Manualshive

Page: 138 / 560

background image

122

Development Environment

©2000-2008 Tibbo Technology Inc.

Remove from Watch List: Covered under

above.

6.2.4.3

Image Editor Toolbar

This toolbar is visible only when graphical resource is selected for editing. When
you select a certain tool an additional

Tool Properties Toolbar

specifically for this

tool is displayed. This toolbar provides all options for the selected tool.

Selection Tool: Selects rectangular image area to move, copy, or
transform.

Hand Tool: Allows you to scroll the image using "hand grip" (position
the tool over the image, click and hold left mouse button, then drag the
image).

Paint Tool: Use this tool to do "freehand" painting over the image.

Eraser Tool: Erases portions of the image (paints with background
color).

Text Tool: Adds text to the image.

Line Tool: Draws straight lines.

Rectangle Tool: Draws rectangles.

Ellipse Tool: Draws ellipses.

Eyedropper Tool: "Picks" the color off the image (left-click over the
image to pick the fore-color; right click to pick the background color).

Zoom Tool: Changes the zoom level (magnification). x1, x2, x4, x8, x16
zoom levels are available.

6.2.4.4

Tool Properties Toolbar

When you select a certain

image edit tool

an additional properties toolbar

specifically for this tool is displayed. This toolbar provides all options for the
selected tool. The following toolbars are available:



Selection Tool Properties Toolbar



Paint Tool Properties Toolbar



Eraser Tool Properties Toolbar



Text Tool Properties Toolbar



Line Tool Properties Toolbar



Rectangle Tool Properties Toolbar

33

122

122

123

123

123

123

124

124

«
...
136
137
138
139
140
...
»

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GA1000

AirPlus DWL-810

Brand: D-Link Pages: 25

Brand: Profile Pages: 6

Brand: Lanner Pages: 78

Brand: Juniper Pages: 190

Brand: Paradyne Pages: 85

Brand: NETGEAR Pages: 84

Brand: E-Lins Pages: 9

Brand: ZyXEL Communications Pages: 2

Active Module Carrier VX402C-64

Brand: C&H Pages: 32

Brand: Hama Pages: 25

Brand: Infoblox Pages: 16

Brand: Hama Pages: 24

Brand: Lantronix Pages: 75

Brand: ADTRAN Pages: 100

Brand: Planet Networking & Communication Pages: 147

Brand: MTL Pages: 12

Brand: Billion Pages: 121

Brand: CYP Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands