Tibbo GA1000 User Manual Download Page 547

Page: 547 / 560

531

TIDE and Tibbo BASIC User Manual

Creating, Deleting, and Renaming Files

, expanded topic content.



Changes in the

sock

object manual:

- Updated

sock.close

sock.reset

, and

sock.discard

topics -- these

methods are ignored when called from within an HTML page;

- Updated

HTTP-related Buffers

-- an HTTP socket can now live without the RX

buffer. Also, HTTP variables of any size can now be received;

- Reworked

Working with HTTP Variables

-- this is now a section; explained

and documented

sock.gethttprqstring

and

on_sock_postdata

;

- Added "Redirection and UDP" to the

Redirecting Buffers

topic;

- Documented URL substitution: new

URL Substitution

and

sock.urlsubstitutes

topics;

- Documented the data sinking feature: new

Sinking Data

and

sock.sinkdata

topics;

- Documented the timeout counter: expanded

Closing Connections

topic (see

Connection Timeouts), added new

sock.toutcounter

topic.



Changes in the

ser

object manual:

- There is a new data sinking feature, so

Sinking Data

and

sock.sinkdata

topics were added;

- Corrected schematic diagram (C) in the

Wiegand Mode

topic.

----------------

31AUG2008 release



Documented

kp. object

lcd. object



Documented

, and

syscalls.



Documented

sys.serialnum

and

sys.setserialnum

. Added

Serial Number

topic.



Added

Using Preprocessor

and

Scope of Preprocessor Directives

topics.



Updated

The Watch

topic -- documented new capabilities such as true support

for arrays, expressions ("x(y)"), etc.



Update

Project Settings

topic -- documented new Customize button.



Updated

EM202

platform -- this platform is now used by "203" devices as

well.

----------------

04AUG2008 release



Documented

fd object



Added

Legal Information

topic.



Deleted "What's New in R2" and "Migration From Version 1" topics.

----------------

10MAR2008 release



Documented

wln object



Documented new EM1000W platform.



Documented new

romfile.offset

R/O property. In connection with this, updated

441

274

328

348

331

315

323

333

344

308

322

364

309

354

290

360

224

245

354

229

484

392

201

205

192

193

221

222

216

134

433

497

378

Summary of Contents for GA1000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands

Tibbo GA1000, User Manual

Search results

Summary of Contents for GA1000

Reviews:

Related manuals for GA1000

Brands by name

Popular brands