THOMSON ViBE VS7000, User Manual

Page: 111 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
ViBE VS7000 111
User Manual
„ Monitoring view : set to True if you want to create a snapshot view for
this input. In this case, indicate the Standard that the TS file to import
respects (DVB, MPEG-2 or ATSC). For more information on snapshot
views, refer to
Section ’Creating a Snapshot View’ on page 65.
„
TS file network storage (mounting point) : location on the server where
the TS file to import in input is stored.
„ TS file folder : folder on the network storage where the TS file to import
in input is stored.
„ TS file name : name of and relative path to the TS file to import in
input.
„ Iterations : number of consecutive times the file will be played.
The TS bitrate is automatically computed from the file PCRs.
SDI Input
Figure 3-81. SDI input parameters
For this item, you must set the following parameters:
„ SDI input : number of the physical SDI input to use. The names set in
the SDI category of the System tab are available in the list.
„ Maximum video format : PAL, NTSC, or a variety of HD resolutions.
„ Number of audio components : enter the number of audio
components that the SDI input contains. For each component, set the
following parameters:
™ Mode : stereo, mono left or mono right.
Loops are not seamless: there are continuity counter errors, and
audio/video disruption.