THOMSON ViBE VS7000, User Manual

Page: 235 / 276

Appendix B ’SNMP Management’ — Registering SNMP Manager on the GUI
ViBE VS7000 235
User Manual
Registering SNMP Manager on the GUI
To register a Manager to receive the traps, proceed as follows:
1. Open the GUI as described in Section ’Reaching the GUI’ on page 36.
2. Select the System tab.
3. Select the SNMP category.
4. Click the Edit button on the top-right corner to be able to modify the
values.
5. Fill in the Read Community and Read/Write Community fields.
6. In the table, add the IP addresses of the SNMP Managers so that they
can receive the traps.
By default, two community strings are declared:
„
public
associated with R/O access level
„ private
associated with R/W access level
To know how to use a table, see Paragraph ’Tables’ on page 39.