THOMSON ViBE VS7000, User Manual

Page: 256 / 276

Appendix F ’Network Settings (6RU and 10RU Devices)’ — Flex10
256 ViBE VS7000
User Manual
Flex10 Configuration
On the CD-ROM, you will find a folder named Flex10 . This folder contains
configuration files for the Flex10 modules.
The format of these files is CLI.
How to Use a Configuration File?
1. Open an SSH session with the active Flex10 (for such a session, you
can use for example the free tool "putty").
Login and password are required to establish the connection.
2. When the SSH session is established, open the configuration file with
MS Wordpad.
3. Copy all the content of the configuration file (using CTRL-A then
CTRL-C, for example), and copy it into the SSH session.
4. Check that all the instructions are correctly executed (reports are given
on the SSH session).
Description of the Configuration Files
Factory Configuration Files
„ Factory_config_Flex10_C3000.txt
„
Factory_config_Flex10_C7000.txt
When you received your VS7000, the Flex10 was configured with a
default configuration.
The configuration files listed above contain this factory configuration.
There is one file for the HP C3000 enclosure and one file for the HP C7000
enclosure.
Files to Help You Apply your Own Configuration
„
First_part_config_Flex10_CX000.txt
„ Last_part_config_Flex10_CX000.txt
When you want to configure the Flex10, it can be easier to reset the
configuration at first and then build your own configuration.
These files will help you do this.
The steps are:
The configuration file is also applied to the other Flex10 of the
enclosure.