THOMSON ViBE VS7000, User Manual

Page: 136 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
136 ViBE VS7000
User Manual
„ Push stream on remote web server : if set to true , the stream is pushed
to a remote Web server. In this case, set the following parameters:
™ Remote web server URL : indicate the LAN used to communicate
with the remote Web server. If the remote Web server URL
contains a name instead of an IP address, you must configure
the DNS in the
System tab, in the IP category (see Section ’DNS’
on page 71).
If you do not wish to use the IP address resolution by DNS, you
can also directly enter the IP address of the remote Web server
in the
Remote web server IP address field.
™ Local storage duration when remote server is unreachable :
enter the time during which the content should be bufferized if
during a push action, the remote server becomes unreachable.
When the remote server is available again, all the content is sent
at once.
™ Delete files from remote web server : if set to true , the files
posted on the remote Web server are deleted after the Available
stream duration set above.
™ Remote web server authentication : if the remote Web server
requires an authentication select its HTTP type, Basic or Digest ,
and enter the User name and Password .
™ Define backup remote Web server : if set to true , the stream is
also sent to a backup remote Web server for redundancy
purposes. Indicate the URL and the IP address of the backup
server in the dedicated fields, as well as the authentication
parameters, if needed.
„ Encrypt files : if set to true , DRM is activated. Set the following
parameters:
™ Key server connection : select from the drop-down list the
conditional access server to which ViBE VS7000 should connect
to get the key. If set to
None , ViBE VS7000 generates the key
itself. Otherwise, enter the specific parameters of the CAS
server:
- Content id (Nagra ): identifier of the program to encrypt
(string).
- Resource id ( Verimatrix ): identifier of the program to
encrypt (integer).
- Account Id ( Irdeto ): identifier of the account to connect to
the Irdeto server.
Before using this feature, check that the bandwidth is widely
dimensioned, because otherwise there is a risk of network
congestion when the remote server is back up, which can impact
other streams.