THOMSON ViBE VS7000, User Manual

Page: 183 / 276

Chapter 7 ’Tools’ — Equipment Setup
ViBE VS7000 183
User Manual
2. Double-click the
EquipmentSetup.jar
file to launch the application.
Connecting to a Device
Figure 7-1. Equipment set-up
To connect to a device:
1. Choose a mode of connection:
™ If the IP address of the equipment is known and can be reached,
check the first option:
IP address is known and reachable . This
method must be used if the equipment is not on the local
network, but can however be reached through routers.
™ If the equipment is physically connected to the local network,
whatever its IP address, check the second option:
IP address is
unknown or unreachable . When choosing this option, the list of
detected equipment on the local network is displayed (see
Figure 7-2 ). Criteria may be given, such as serial number and/or
part number.