THOMSON ViBE VS7000, User Manual

Page: 126 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
126 ViBE VS7000
User Manual
Figure 3-102. MPEG-1 layer 2 encoder parameters
For this item, you must set the following parameters:
„ Bitrate : enter the bit rate value (without encapsulation overhead), in
bits per second.
„ Stereo mode : choose the stereo mode to use from the drop-down list.
Available modes are:
™ Joint stereo : removes stereo intensity irrelevance
™ Stereo
™ Dual channel : uncorrelated (contains two completely different
audio streams but encodes them together).
This parameter is ignored when the input is mono.
H.264 AVC Encoder
The H.264 AVC encoder item is able to encode H.264 AVC video in 4:2:0,
8 bits, from low resolution up to HD.
Figure 3-103. H.264 AVC encoder parameters
When the input video is chunked, an IDR frame is set at the beginning
of the chunk. This overrides the configuration parameters.