THOMSON ViBE VS7000, User Manual

Page: 147 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
ViBE VS7000 147
User Manual
To use the Choice tool, you first need to have in your workflow a public
parameter with a label. For our example, publish and give a label to the
bitrate parameter in the input item.
Insert the Choice item in your configuration and link it to the preceding
item.
Figure 3-117. Inserting the Choice item in a workflow
Use the condition editor to perform your configuration. For our example,
set the condition of the
Choice item as shown below.
Figure 3-118. Example of condition configuration for a Choice item
Selector
The Selector tool lets you define a condition to choose the input that
should be used. It works basically the same way as the Choice tool, but
reversely.
Let us take an example: a configuration contains two inputs: one TS over
IP input and one TS file input. We want the job author to choose whether
to use one input or the other. We thus use the
Selector tool, as shown in
Figure 3-119 .
Figure 3-119. Example of use of the Selector tool