THOMSON ViBE VS7000, User Manual

Page: 65 / 276

Chapter 3 ’Web Browser Interface’ — Basic Settings
ViBE VS7000 65
User Manual
Linking the SDI Inputs To the Matrix
You can then create links between the matrix outputs and the ViBE
VS7000 inputs. To do so, click an output node of the matrix, hold the
mouse and drag it over an input node of an SDI card. A link is created.
Figure 3-36. Linking the SDI inputs to the matrix
For more information on the SDI category, see Section ’SDI’ on page 74.
Using the Matrix’ Inputs
When creating a workflow, in the SDI input item, you can enter the name
of the SDI matrix input in the SDI input parameter.
Otherwise, proceed the same way as for a simple SDI input, as described
in
Section ’Configuring an SDI Input’ on page 61.
When you launch a job, the matrix is automatically configured.
Creating a Snapshot View
There are two ways of creating a snapshot view:
„ By clicking New in the Snapshot view.
„
By specifying it when creating a job with a TS over IP or file input.
Creating a New Snapshot View
If you want to see what your input contains so as to ease your
configuration, you can display the content of your input transport stream
in a tree in a snapshot view. To do so:
1. In the Snapshot view top-right corner, click New .