THOMSON ViBE VS7000, User Manual

Page: 133 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
ViBE VS7000 133
User Manual
„ Adaptation for Anevia’s external packager : set to true to generate a
transport stream that can be read and processed by Anevia’s
ViaMotion devices. Do not use this feature if your TS is not sent to this
kind of device.
TS Multiplexer Output
The TS Multiplexer item multiplexes transport packets in an MPEG-2 TS.
Figure 3-107. TS multiplexer parameters
For this item, you must set the following parameters:
„ TS rate : set the TS rate in bits per second.
„ TS ID
„ PAT period : enter the period of the PAT, in milliseconds.
„ PMT period : enter the period of all the PMT, in milliseconds.
„ Standard : set the standard that the output TS should respect (DVB,
MPEG-2 or ATSC).
In the Input tab, additional parameters are available:
„
Input type : choose between:
™ Program : defines a program and a component of this program.
In this case, set the following parameters:
- PMT PID
- PCR PID : the Auto value is suitable in 99% of cases. Specify
the PID if you asked to create an independent PCR PID in the
TS audio video packetizer item, in the PCR generation field
(see Section ’TS Audio Video Packetizer Item’ on
page 132).
™ Component : defines a component of a program that has already
been defined.
For example: define a program input for the video component
and a component input for the associated audio component.
„ Program number : program number of the component.
„
Component PID