THOMSON ViBE VS7000, User Manual

Page: 104 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
104 ViBE VS7000
User Manual
Workflow Library Content Parameters
This section provides details on all the items that can constitute a
workflow. Some parameters are recurrent, others are specific.
Introduction
To access the parameters of an item, double-click the item.
The Properties dialog box displayed for an item always looks the same.
It contains:
„ An array with the list of parameters
„ An input and/or output category
„ A multi-instance check box
Item Parameters Array
The array lists the parameters that should be set for the item. It contains
a row per parameter, and the following columns:
„ Name : name of the parameter, not editable.
„
Default value : click to enter a default value. This default value is
applied for private and protected parameters. For public parameters,
the default value is proposed but the job author can modify it.
„ Publish : choose if the parameter should be:
™ Private : the parameter is set and invisible during instantiation.
This is the status you must use when creating a workflow for
parameters that you do not want the job authors to see or
change.
™ Protected : the parameter is visible but not editable during
instantiation. Use this status if you want to let the job authors
see the value of a parameter without being able to change it.
™ Public : the parameter is visible and editable during instantiation.
Use this status for all parameters that the job authors must set.
„ Label : click to choose an explicit name for the parameter, as it will
appear to the workflow user instead of the original name (optional). If
you want to be able to link a parameter to a private parameter, it is
imperative that you give a label to this private parameter.
„ Value restriction : double-click to define restrictions for a value. Check
the box and choose a type of restriction:
™ Range : enter the minimum and maximum values.