THOMSON ViBE VS7000, User Manual

Page: 146 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
146 ViBE VS7000
User Manual
„ TS file name extension : specify the file extension that the output TS
file should have.
If this parameter is not filled, the TS file name will be kept "as is".
If this parameter is filled, any extension of the TS file name parameter
will be replaced by this extension. This is useful when you want to
keep the input file name (hot folder application, for example) and
replace only the extension: you link the TS file name to the input TS
file name, and you force the extension using the
TS file name
extension .
Workflow Library: Samples
The following sample workflows are provided:
„ Sample IP TV 1
„ Sample Web TV HLS 1
„ Sample Web TV Smooth Streaming 1
„ Sample Web TV Smooth Streaming 2
These workflows are presented in Section ’Creating a Job Based on a
Sample Workflow’ on page 43.
Tools
The Selector and Choice tools let you define a condition to choose the
input or output that should be used, respectively. They are both built the
same way.
Dialog Description
The dialog contains two parts.
Parameter
„
Create a parameter to be used in the condition : check the box if you
want the job’s author to set a parameter that will be used in the
condition to choose the output. Edit the cells to create the parameter.
Conditions
The array lets you set a condition for each output. Double-click in the
Condition column or click the button to access the condition editor.
This editor is described in Section ’Item Parameters Array’ on page 104.
You can add inputs or outputs if needed.
Choice
The Choice tool lets you define a condition to choose the output that
should be used. For example, let us imagine you want to send the stream
to a different output based on the input bitrate, e.g. send it to output A if
the bitrate is lower than 80,000 kbps, and to output B if it is higher.