THK TSC Series, Instruction Manual, Page: 73 / 100

7.
Positioning operation
5-12
5. Operations and
adjustment
TSC
7-1
Positioning operation
⿟ You can perform this in all operation modes.
⿟ When "Push (%)" in the program table is "0," positioning operation will be performed to move the
actuator to the target "Position."
⿟ The INPS output (pin.30) is turned ON when the current position enters into the "IN-POSI" of the
target "POSI."
⿟ For more information on settings, see the separate D-STEP or TDO Instruction Manual.
STEP No. ABS / INC
Position Speed ACC DCC JUMP
Comment
[mm] [mm/s] [mm/s
2
] [mm/s
2
] [No.]
0 ABS 70.00 80 3 3 1 Positioning operation 1
1 ABS 100.00 30 3 3 E Positioning operation 2
Speed
30mm/s
Position
100mm
Target
position 1
80mm/s
70mm
Target
position 0
* Some of the setting fields are omitted.
Example
STEP No.0 STEP No.1