ThermoFisher Scientific Vanquish VC-D50, Operating Manual

Page: 59 / 188

5 • Installation
Fluorescence Detectors (VC-D50, VC-D51, VF-D50, VF-D51)
Operating Manual Page 59
5.5.2.1 Connecting the Interface Cables
The connection of the interface cables depends on whether the detector
is used as the only detector or as a second detector in the Vanquish
system.
The Detector is the only Detector in the System
Connect the required interface cables to the detector. For information
about how to connect the detector to other modules in the Vanquish
system or to the chromatography data system computer, refer to the
Vanquish System Operating Manual .
The Detector is the Second Detector in the System
If the fluorescence detector is the second detector in the Vanquish
system (for example, after the diode array detector), set up the USB and
system interlink connections as shown in the figure.
1. Follow the instructions in the Vanquish System Operating Manual to
connect the other modules in the system up to the diode array
detector.
2. Connect a USB cable from a free USB port on the diode array
detector to the fluorescence detector.
3. Connect a system interlink cable from the free System Interlink port
on the diode array detector to the fluorescence detector.
4. Connect a system interlink cable from the free System Interlink port
on the diode array detector to the column compartment.