ThermoFisher Scientific Vanquish VC-D50, Operating Manual, Page: 57 / 188

5 • Installation
Fluorescence Detectors (VC-D50, VC-D51, VF-D50, VF-D51)
Operating Manual Page 57
5.5.2 Connecting the Device
Device Connectors
The following connectors are provided on the device:
Figure 12: Electrical connectors on the right side of the detector
No. Description
1 Rating plate, indicating the serial number, part number, module name,
revision number (if any), line and fuse rating, and the manufacturer's
address
2 Main power switch (on/off control)
3 Fuse holder
4 Power-inlet connector
5 System Interlink port
Allows power on/off control for the detector from the Vanquish system
base and device communication and synchronization between the detector
and other modules in the Vanquish system.
For example, the interconnection between autosampler and detector
automatically enables direct synchronization of sample inject and data
acquisition start in the detector. As a result, the synchronization improves
the retention time reproducibility.