Thermo Scientific Ion Torrent A45727 User Manual Download Page 90

Page: 90 / 163

Use the buttons and dropdown list at the top of the View Results screen to view

information for different samples and assays in the run.

• Use the single arrows to navigate between the sample results. Use the double

arrows to navigate between assay results, if more than one assay was used in

the run.

• Select the sample or assay you want to view from the dropdown list.
All of the samples that were run with the same assay share the same run metrics.

All other results are sample-specific.

Chapter 9

Review data and results

View sequencing results and run metrics

Genexus

™

Integrated Sequencer User Guide

Summary of Contents for Ion Torrent A45727




































































































































































Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands

Thermo Scientific Ion Torrent A45727, User Manual

Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands