Thermo Scientific Ion Torrent A45727 User Manual Download Page 38

Page: 38 / 163

In the Parameters step, review the prepopulated analysis settings, then modify if

needed. Click Next when finished.

Scrolling from the top, the settings are grouped in the following categories:

• Library Prep & Templating

Parameters
If needed, change the default

settings for the cycling and input

parameters used in library and

template preparation.

• Primary Analysis Parameters
• Annotation
• CNV Finding
• Fusions
• Read Mapping
• Variant Finding

A parameter category can be quickly brought to the top of the screen by selecting

it in the Filter Parameters by... list at the upper left.

Chapter 3

Create and manage assays (manager/administrator)

Create a new assay (manager/administrator)

Genexus

™

Integrated Sequencer User Guide

Summary of Contents for Ion Torrent A45727




































































































































































Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands

Thermo Scientific Ion Torrent A45727, User Manual

Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands