Thermo Scientific Ion Torrent A45727 User Manual Download Page 82

Page: 82 / 163

Inspect the Genexus

™

Filter in the liquid waste disposal port and verify that no

standing liquid is present. If standing liquid is present, manually remove the

liquid with a pipette, then pull out the filter.
• If the Genexus

™

Filter is clogged, replace it with a new filter. For more

information, see “Replace the Genexus

™

Filter“ on page 135.

• If the Genexus

™

Filter does not appear to be clogged, contact Technical

Support and report a possible deck liquid waste line clog.

When finished, close the deck door, then tap Next.

A two-minute UV Clean starts.

Chapter 7

Load the sequencer and start a run

Clear the instrument deck and perform a UV Clean

Genexus

™

Integrated Sequencer User Guide

Summary of Contents for Ion Torrent A45727




































































































































































Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands

Thermo Scientific Ion Torrent A45727, User Manual

Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands