Thermo Scientific Ion Torrent A45727 User Manual Download Page 121

Page: 121 / 163

Number

Icon

Description

Chip status – Connecting

Chip status – Ready

Chip status – Imaging

Chip status – Error

Chip lane status – 4 lanes available

Chip lane status – 1 lane in use, 3 lanes available

Chip lane status – 2 lanes in use, 2 lanes available

Chip lane status – 3 lanes in use,1 lane available

Chip lane status – 4 lanes in use, 0 lanes available

Instrument File System Space, the percent of file space

used is indicated.

[1]

The instrument checks for sufficient

disk space before each run and notifies the user if there

is not enough.

Instrument Server File System Space, the percent of file

space used is indicated.

Note:

If the indicator turns red, archive data from the

server to free up disk space. Refer to the Genexus

™

Software Help for more information on archiving data.

[1]

Indicator turns yellow when disk space is ≥67% full, indicator turns red when ≥90% full.

Settings

In the Settings menu, users can view and/or change instrument settings, manage data

and network configurations, and clean the instrument.

Appendix B

Touchscreen reference

Settings

Genexus

™

Integrated Sequencer User Guide

121

Summary of Contents for Ion Torrent A45727




































































































































































Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands

Thermo Scientific Ion Torrent A45727, User Manual

Search results

Summary of Contents for Ion Torrent A45727

Reviews:

Related manuals for Ion Torrent A45727

Brands by name

Popular brands