C-Link Protocol Commands
Measurements
Thermo Fisher Scientific
Model 42
i
Trace Level Instruction Manual
B-9
Command
Description
Page
sc (screen)
C-series legacy command that reports a generic response
(Use iscreen instead)
B-30
sp field
Reports/sets item number and name in scratch pad list
B-24
span
Sets zero/span valves to span mode
B-33
span gas
Sets zero/span valves to span gas mode
B-33
sr
Reports last short record stored
B-19
srec
Reports maximum number of short records
B-20
srec format
Reports/sets output format for short records (ASCII or binary)
B-21
srec layout
Reports current layout of short record data
B-22
srec mem size
Reports maximum number of short records
B-22
srec per
Reports/sets short record logging period
B-23
stream per
Reports/sets current set time interval for streaming data
B-25
stream time
Reports/sets a time stamp to streaming data or not
B-25
temp comp
Reports/sets temperature compensation on or off
B-34
time
Reports/sets current time (24-hour time)
B-37
up
Simulates pressing up pushbutton
B-29
zero
Sets zero/span valves to zero mode
B-33
zero gas
Sets zero/span valves to zero gas mode
B-33
avg time
high avg time
low avg time
These commands report the averaging time in seconds when operating in
single range, or averaging time used with the high and low ranges when
operating in dual or auto range mode. The example below shows that the
averaging time is 300 seconds, according to
Table B–2
.
Send:
avg
time
Receive:
avg time 12:300 sec
set avg time
selection
set high avg time
selection
set low avg time
selection
Measurements
