87
3-3-8. Running a Fast Sequence
Description
A Fast Sequence is run the same way as a
normal load.
Operation
1.
Press
FUNC
>
Fast Sequence[F3].
2.
Turn fast sequence mode on by setting
F. Seq.[F1]
to
On
.
FSEQ
will appear at the top of the
display when
F. Seq.
is On.
3.
Turn the load on.
The fast sequence/chain starts immediately.
The
FSEQ
icon turns orange when the load is
turned on.
4.
When a fast sequence is running, the screen
displays which step and loop is currently active.
“Sequence Complete” will be shown on the
display at the end of the sequence.
Display:
Fast Sequence
Running
FSEQ
RS232
31/Oct/2013
Run F.Seq.
0.998
V
153.10
mA
0.1528
w
Step
Loop:
0001
0023
Current loop number
Current step number
3-4. OCP TestAutomation
Background
The OCP test function creates an automatic test
to test the OCP of power supply products.
This test will test to see when the over current
protection of a power supply is tripped and return
the measurements for the voltage and current
when the over current protection was tripped. The
LSG also has a user-defined cutoff setting in the
event that the power supply OCP fails.
The diagram below shows an example of the
OCP Test Automation function:
Summary of Contents for LSG SERIES
