TEXIO LSG SERIES, Instruction Manual

Page: 32 / 167

20
5.
When the top and bottom covers are flush,
reinsert the screw that was removed in step 1.
5
1-4-10. Using the Terminal Cover (PEL -013)
Description The flexible rear panel terminal cover should
be used when the load wiring becomes too
thick to be used with the PEL-011 terminal
cover. This is especially true when using the
load generators in parallel. Like the PEL-013
terminal cover, the PEL-011 is used to
prevent electric shock. The rear panel
terminal covers should always be used when
connecting a load to the rear panel terminals.
Caution
Ensure the power is off before making any
connections to the booster pack.
1. Wrap the insulation sheets around the
terminals and load cables, as shown below.
Make sure the terminals and any exposed
wires are covered by the sheets.
Insulation sheet
1