TEXIO LSG SERIES, Instruction Manual

Page: 24 / 167

12
1-4-2. Power Up and Self Test
Steps
1.
Insert the AC power cord into the power socket.
2.
Turn the external power
switch on.
(O → —)
3.
If the unit doesn’t turn on, press the On/Standby
key for a second.

The ON/STBY key will go from standby (red) to
on (green).
4.
The unit will show the splash screen and then
load the settings from when the unit was last
powered down.
5.
To turn off the power, press the ON/STBY key
again for a second.
Note
If the LSG Series fails to start up properly or
does not turn on, please see your local
distributor.
1-4-3. Load Default Settings
Description When first using the LSG Series, recall the
factory default settings to ensure the unit is in a
known state. See page 127 for a list of the
default settings.
Operation
1.
Press
Shift
+
File
FUNC
.
Select Media/Default[F1] .
Select Factory Default[F2] .
Media
Default
Factory
Default
Save Recall
LOAD RS232
A Value
Fine
31/Oct/2013
Load Default Setup
CC
35A
15V
Static
Recall The Default Settings!
Pressing F2 Again will
Warning!!!