TEXIO LSG SERIES, Instruction Manual

Page: 161 / 167

149
7-7-14. Other
Elapsed Time Delay
Measures the time from load on to load off. On/Off
selectable.
Measures from 1 s up to 999 h 59 min 59 s
Auto Load Off Timer
Automatically turns off the load after a specified time
elapses.
Can be set in the range of 1 s to 999 h 59 min 59 s or off
Communication Function
GP-IB
IEEE std. 488.1-1978 (partial support)
SH1, AH1, T6, L4, SR1, DC1, DT1.
Supports the SCPI and IEEE std. 488.2-1992 command
set
Sets panel functions except the power switch and reads
measured values
RS-232C D-SUB 9-pin connector (conforms to EIA-232-D)
Sets panel functions except the power switch and reads
measured values
Supports the SCPI and IEEE std. 488.2-1992 command
set
Baud rate: 2400, 4800, 9600, 19200, 38400 bps
Data length: 8-bit, Stop bit: 1, 2-bit,
Parity bit: None, Odd, Even.
USB Conforms to USB 2.0 Specifications and USB-CDC ACM
Sets panel functions except the power switch and reads
measured values
Communication speed 12 Mbps (Full speed)
7-7-15. Analog External Control
Load on/off Control Input
Turn on the load with low (or high) TTL level signal
Load on Status Output
On when the load is on
(open collector output by a photocoupler)
Range Switch Input
Switch ranges L, M, and H using a 2-bit signal
Range Status Output
Outputs range L, M, or H using 2-bit signal
(open collector output by a photocoupler)
Trigger Input
Clear the sequence operation pause with a high TTL level
signal for 10
μs or more.
Alarm Input
Activate alarm with low TTL level signal input