TEXIO LSG SERIES, Instruction Manual

Page: 83 / 167

71
Program
Setting Display
Overview
Chain
Previous
Menu
LOAD RS232
03/09/12
Timing Edit for Program
On-Time:
Run:
Memory
0.1
Skip
M001
Short-Time:
P/F-Time:
Off-Time:
Off
Off
Off
STEP: 01
Program
Off
Recall
Default
Program
number
Step number in
selected program
Program
settings
PROG: 01
Program
settings
Operation
1.
Press
FUNC
> Program[F1].

Note that Program[F1] is off by default.
2.
Select PROG and select a program number to
edit.
PROG 01 ~ 16
3.
Select a STEP in the selected program.
STEP 01 ~ 16
4.
Select Memory and select which memory
location to load for the selected step.

Settings loaded from the memory location will
be used for the selected step.

The same memory location can be used for
multiple steps.
Memory M001 ~ M256
5.
Set the Run setting for the step.

By default RUN is set to Skip.

The Auto setting will automatically start and go
onto the next step.

The Manual setting will wait for the user to
press Next[F2] before running the step.
Run Skip, Auto, Manual
6.
Choose the On-Time in seconds.

The on-time setting determines how long the
load is turned on for the selected step.

The on-time is defined as the total test time
minus the off-time.
On-Time 0.1 ~ 60 seconds