TEXIO LSG SERIES, Instruction Manual

Page: 89 / 167

77
Last Value The setting value of the load for
when Last Load = ON.
Chain Off, S01~S10 Sets the next sequence in the
chain, when not set to off.
Data Edit
Overview Each step in a normal sequence contains the
following setting parameters:
Setting Setting Range Description
Step 0001 ~ 1000 Selects/displays the current step
in the sequence.
・
The number of available steps is
dependent on the number of
steps added using the
Insert
Point[F1] functions.
Value The current, voltage, power or
resistance setting for the
selected operating mode.
Load ON, OFF Turns the load on or off for the
selected step.
RAMP ON, OFF When turned on the current
transition is evenly ramped from
the start of the step to the end of
the step. When turned off the
current transition is stepped.
Time
amplitude
Step time
Ramp = On
Time
amplitude
Step time
Ramp = Off
TRIG OUT ON, OFF When TRIG OUT is set to ON, a
trigger signal is output from the
TRIG OUT BNC terminal at the
start of the step. See page 113
for details.