Terumo CDI 550, Operator'S Manual

Page: 22 / 173

introduction chapter 1 1-17
• Use caution when administering novel pharmacological agents when
the user is unfamiliar with the potential effect of such agents on the CDI
sensors.
• Do not attempt in vivo recalibration expecting to re-align values affected
by interference due to intravascular dyes or pharmacological agents;
the interference may be prolonged resulting in continuing inaccuracies.
Caution
• Do not use a CDI H/S Cuvette after the lot number expiration date printed on
the package label.
• The CDI H/S Cuvette tubing connections should be secured with tie bands.
Terumo CDI Monitor Pole Clamp
The CDI Monitor Pole Clamp attaches to standard heart-lung machine poles, and
consists of an arm and a tray with an alignment cone. The monitor attaches to the tray
for easy mounting and dismounting. The pole clamp is available in two arm lengths, 7
inches (CDI Model CDI517) and 4-1/2 inches (CDI Model CDI518). The shorter arm
cannot accommodate the calibrator hook.
Once the monitor is placed on the tray, push the locking screw up towards the monitor
and tighten in a clock-wise direction to secure monitor to the monitor pole clamp.
Warning
• Never leave the monitor on the pole clamp tray without securing the
locking screw.
5170117
Alignment cone
Locking screw
Tray
Arm
Heart-lung machine pole