Terumo CDI 550, Operator'S Manual

Page: 153 / 173

communication with other devices appendix c C-22
Error (‘E’):
Value Name Description
‘0’ System Error An error packet will always send a ‘0’ in the SubCom-
mand field. The 4-digit ASCII error code will be included
in the data field (e.g., “F038”)
Get (‘G’):
Value Name Description
‘0’ Single Record Request a single line of data. The CDI System 550 will
return an Attention 4 Analyte data packet.
‘1’ Analyte Out-
put Interval Request the CDI System 550 analyte output interval,
in seconds. The CDI System 550 will respond with
an Acknowledge packet with the data containing G1X
where X is the integer value between 0 and 6000 (0 is
disabled).
‘2’ Time Request the CDI System 550 system time. The CDI
System 550 will return an Acknowledge packet with
the data containing G2HH:MM:SS (military format time
string).
‘3’ Summary
Buffer Request the Case Summary buffer be dumped in
packet format. This will cause the CDI System 550 to
send Case Summary data (Attention 5), each packet a
separate line.
‘4’ EEPROM
Dump Request the EEPROM dump form to be sent in packet
format, one line at a time. This will cause the CDI
System 550 to send EEPROM Dump data (Attention 7)
packets.
‘5’ Operate State Request the Operate State. The CDI System 550 will
return an Acknowledge packet with the data containing
G5X where X is either 1 (CDI System 550 is in Operate
mode) or 0 (CDI System 550 is not in Operate mode).
‘6’ Arterial Flow Generated by the CDI System 550, this will be a way
for the CDI System 550 to request the arterial flow from
a pumping system. The expected response would be a
“Set 0” packet, setting the Arterial flow.
‘7’ BSA Generated by the CDI System 550, this will be a way
for the CDI System 550 to request the body Surface
Area, in m
2
. The expected response would be a “Set 6”
packet, setting the BSA.