Terumo CDI 550, Operator'S Manual

Page: 151 / 173

communication with other devices appendix c C-20
SubCommand List.
Each major Command type has a list of numeric SubCommand values used to pro-
duce a specific action. Below are the SubCommands listed for each Command.
Attention (‘A’):
Value Name Description
‘0’ Unsolicited
Data Packet Analyte Packet sent by CDI System 550 at the speci-
fied output interval. See Analyte Packet section for
more information.
‘1’ Mark Data
Packet Analyte Packet sent by CDI System 550 when the
Mark key is pressed.
‘2’ Store Data
Packet Analyte Packet sent by CDI System 550 when the
Store key is pressed.
‘3’ Recal Data
Packet Analyte Packet sent by CDI System 550 when the Re-
cal key is pressed.
‘4’ Solicited Date
Packet Analyte Packet sent by CDI System 550 in response to
a Data Request.
‘5’ Case Sum-
mary
Data A line of the Case Summary stored during a case.
Multiple lines of this type of packet will be sent when
the “Print Case” key is pressed.
‘6’ Calibration
Data Calibration Data Packet sent by CDI System 550 dur-
ing calibration if requested and if in Service Mode.
‘7’ EEPROM
Dump Data A line of the EEPROM Dump information sent by CDI
System 550 in response to an EEPROM dump re-
quest, while in Service Mode.