Terumo CDI 550, Operator'S Manual

Page: 121 / 173

system specifications appendix b B-6
Electrical
Monitor Power:
100-240V~, 50/60 Hz, 75 VA continuous duty, 95 VA
momentary duty.
12 volt lead acid battery backup.
Calibrator Power:
Supplied via connection with monitor.
Leakage Current: In the event of the failure of a line-powered instrument
attached to the monitor serial port, causing AC line
power (120 VAC) to be applied to the monitor circuitry,
testing on file at Terumo demonstrates that current
flow through the patient would be well below the 10
microamp maximum specified in IEC 60601-1 and UL
60601-1.
Note: To provide isolation from supply mains, remove power cord from the CDI
System 550 appliance coupler. Do not position the CDI System 550 so that it is
difficult to isolate the appliance coupler from the supply mains.