Terumo CDI 550, Operator'S Manual

Page: 42 / 173

choosing system settings chapter 4 4-3
The following table describes the printer options and their settings.
Printing On/Off
Determines whether the printer is used during a procedure.
Print Frequency
Determines how often to print values during a procedure.
Possible values are 0-15 minutes (in increments of 1 minute)
or 15-60 minutes (in increments of 5 minutes).
Case Summary Determines the time intervals for the inclusion of data in the
case report, which you can print at the end of the case.
Possible values are 1-15 minutes, in increments of one minute.
Note: The case data is erased when you return to operate
mode after the next power up. Be sure to print the case report
before that point.
Summary
Delivery Determines where the case summary is sent. Options are to
the printer, to the serial port, or to both simultaneously.
Regardless of where the case summary is sent, the printing
On/Off option must be set to “On.”
Note: A case summary will only be sent when the “print case”
soft key is pressed.
When you have made all your selections and confirmed them, press the key to
move on to the next screen.
There are two special soft key functions that only appear in the printer options screen.
These are described as follows:
Print case Executes the printing of the post-case summary report.
License Executes the display of the software license agreement be-
tween you and Terumo CVS. Use the and keys to view
the entire license agreement.
System Notifications
System notifications consist of physiological alarms and technical alarms (status and
error messages) and information messages. Physiological alarms are covered in
detail in the next Section, “Setting Alarms”. Technical alarms concern medium priority
equipment and system issues that may require an operator response to resolve. A list
of technical alarms can be found in Chapter 9.