Terumo CDI 550, Operator'S Manual

Page: 7 / 173

introduction chapter 1 1-2
Operator Profile
This device is typically operated by a perfusionist and is not left unattended. A perfu-
sionist usually possesses a degree with various levels of experience and perfusion-
specific education. Some perfusionists may have other healthcare credentials. In some
countries, the perfusionist completes a formal educational perfusion program followed
by clinical practice prior to becoming certified and/or licensed to practice. In other coun-
tries, the perfusionist does not complete a formal perfusion education program, and
learns the profession by practice and on-the-job training only.
Minimum Physical Requirements: Has physical ability to stand for long periods of time,
and to stoop, bend, reach, grasp, or feel as needed; capable of lifting approximately 25
lb. from the floor location to countertop height; Normal visual and audible acuity (with
correction if needed).
Training Requirements
Before you set up or operate the CDI System 550, it is vital that you read and under-
stand all the material in this manual. To arrange additional training, please contact your
local Terumo Cardiovascular Systems representative or call 1-800-521-2818 and ask
about CDI System 550 training.
How to use this manual
Before you set up or operate the CDI System 550, it’s vital that you read and under-
stand all the material in this manual.
Once you’re familiar with the contents of the manual, you can use it as needed for refer-
ence. To help you find things quickly, here’s a description of the manual’s organization.
„
Getting Started
Chapter 1 introduces the CDI System 550 and its parts.
Chapter 2, “Quick Start,” gives an overview of the tasks required to set up and use
the system.
„
Using the CDI System 550
Chapter 3 explains how to set up the monitor, calibrator, and printer.
Chapter 4 shows how to specify the appropriate software settings.
Chapter 5 tells how to calibrate the sensors.
Chapter 6 gives instructions for installing the sensors in the extracorporeal circuit.
Chapters 7 and 8 describe how to use the system during a procedure.
„
Reference
Chapter 9 gives information to help you troubleshoot problems.
Chapter 10 contains instructions for system maintenance.
Appendices A and B list the system components and specifications (respectively).
Appendix C gives instructions for communicating with an external device.
Appendices D, E, F and G contain information about the product symbols, warranty,
service policy, patents, and software license (respectively). Appendix H is a glos-
sary of terms.