Tennant 550 Manual Download

Page: 33 / 200

MAINTENANCE

3-3

550E MM149 (3--91)

RECOMMENDED FIRST 50-HOUR MACHINE INSPECTION

AFTER THE FIRST 50 hours of operation, the

following procedures are recommended:

1. Check brushes for even wear and rotate

brushes end-for-end.

2. Check scrub brush pattern.

3. Check scrub head side squeegee blades for

wear or damage.

4. Check rear squeegee for worn or damaged

blades, or for incorrect adjustment.

5. Check vacuum fan and pump drive belts for

correct tension adjustment.

6. Check tires for correct inflation.

7. Check brush drive chains for correct tension

and oil level.

8. Check vacuum hoses for damage or loose

connections.

9. Check tightness of nut attaching each front

wheel hub to front axle.

10. Check tightness of front and rear wheel

mounting nuts.

11. Perform all remaining 50-hour lubrication

and maintenance procedures listed in

MAINTENANCE CHART

Summary of Contents for 550









































































































































































































Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands

Tennant 550, Manual

Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands