Tennant 550 Manual Download

Page: 27 / 200

OPERATION

2-17

550E MM149 (9--00)

4. Remove the cover plates from the front drive

wheels to disengage the electric propelling

motors.

DISENGAGING PROPELLING MOTORS

A. Cover Plate

FOR SAFETY: When loading machine

onto truck or trailer, use winch. Do not

drive the machine onto the truck or

trailer unless the loading surface is

horizontal AND is 380 mm (15 in) or less

from the ground.

5. Turn the machine so the pivot lock holes line

up, then insert the pin in the lined up holes.

The pin will prevent the machine from

pivoting and creating a pinch area.See

PIVOT LOCK PIN

section of this manual.

WARNING: Crush Hazard Between Front

And Rear Halves Of Machine. Engage

Pivot Lock.

00251

PIVOT LOCK PIN IN USE

A. Machine Trailer Section

B. Machine Tractor Section

C. Pivot Lock Pin

6. Position the machine onto the truck or trailer

as far as possible. If the machine starts to

veer off the centerline of the truck or trailer,

stop and turn the steering wheel to center

the machine.

7. Set the parking brake, lower the scrub head

and block the machine tires. Tie down the

machine to the truck or trailer at the six tie

down locations before transporting.

8. Tie the front of the machine at the two

corners of the front frame.

FRONT TIE DOWN LOCATION

A. Front Tie Down Holes

9. Tie the middle of the machine on the tie

down bracket on the rear of the tractor

frame.

MIDDLE TIE DOWN LOCATION

A. Middle Tie Down Bracket

Summary of Contents for 550









































































































































































































Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands

Tennant 550, Manual

Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands