Tennant 550 Manual Download

Page: 25 / 200

OPERATION

2-15

550E MM149 (2--05)

OPTION OPERATION

VACUUM WAND

The vacuum wand option gives the machine the

added flexibility of picking up spills not accessible

by the machine. A 20 ft (6095 mm) hose and

wand utilizes the machine vacuum system.

TO OPERATE VACUUM WAND:

1. Set the machine parking brake.

FOR SAFETY: Before Leaving Or

Servicing Machine; Stop On Level

Surface, Set Parking Brake, Turn Off

Machine And Remove Key.

2. Remove the vacuum wand and hose from

storage on the machine.

3. Remove the rear squeegee vacuum hose

plate from the rear of the tank.

4. Attach the vacuum hose plate to the rear of

the tank, using the toggle clamps provided.

5. Place the master power switch in the “on”

position.

6. Place the wand switch in the “on” position.

7. Operate the squeegee wand as required.

8. When finished, shut off the wand switch,

shut off the master power switch, and

remove the vacuum hose plate from the rear

of the tank.

9. Reconnect the rear squeegee vacuum hose

plate to the rear of the tank, using the toggle

clamps provided.

10. Clean and rinse off squeegee wand and

related equipment as required.

11. Store the squeegee wand equipment in the

proper locations.

Summary of Contents for 550









































































































































































































Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands

Tennant 550, Manual

Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands