Tennant 550 Manual Download

Page: 37 / 200

MAINTENANCE

3-7

550E MM149 (3--91)

SCRUB HEAD PIVOT

There are four grease fittings which are used to

lubricate the scrub head pivot assembly--one on

each of the four scrub head pivot blocks. Apply

grease to these fittings after every 50 hours of

operation. Use Lubriplate EMB grease

(TENNANT Part No. 01433--1).

03790

SCRUB HEAD PIVOT

A. Pivot

B. Grease Fitting

03791

SCRUB HEAD PIVOT

A. Scrub Head

B. Grease Fitting

SCRUB HEAD HINGES

There are two grease fitting which are used to

lubricate the scrub head hinges. One grease

fitting is located on the underside of each of the

hinges. Apply grease to these fittings after every

50 hours of operation. Use Lubriplate EMB grease

(TENNANT Part No. 01433--1).

03792

SCRUB HEAD HINGE

A. Scrub Head

B. Grease Fitting

REAR SQUEEGEE CASTERS

Lubricate the rear squeegee casters after every

50 hours of operation. Use Lubriplate EMB grease

(TENNANT Part No. 01433--1).

Summary of Contents for 550









































































































































































































Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands

Tennant 550, Manual

Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands