Tennant 550 Manual Download

Page: 13 / 200

OPERATION

2-3

550E MM149 (3--91)

PREPARATION FOR OPERATION

AFTER UNLOADING AND BEFORE

OPERATING THE MACHINE:

1. Check the machine for shipping damage.

2. Read this manual carefully before operating

or servicing the machine.

FOR SAFETY: Do Not Operate Machine

Unless Operation Manual Is Read And

Understood.

3. Check the hydraulic fluid level in the

hydraulic fluid reservoir. TENNANT hydraulic

fluid is recommended. If TENNANT

hydraulic fluid is not available, use only new,

approved hydraulic oil. See

HYDRAULICS

the

MAINTENANCE

section.

4. Check the battery charge. Charge if needed.

See

BATTERIES

in the

MAINTENANCE

section.

5. Check the brush adjustment, as described in

BRUSHES

in the

MAINTENANCE

section.

6. Check the air pressure of the tires. See

BRAKES AND TIRES

in the

MAINTENANCE

section.

Summary of Contents for 550









































































































































































































Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands

Tennant 550, Manual

Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands