Tennant 550 Manual Download

Page: 2 / 200

This manual is furnished with each new model. It provides

necessary operation and maintenance instructions.

Read this manual completely and understand the ma-

chine before operating or servicing it.

This machine will provide excellent service. However, the

best results will be obtained at minimum costs if:

The machine is operated with reasonable care.

The machine is maintained regularly - per the ma-

chine maintenance instructions provided.

The machine is maintained with manufacturer sup-

plied or equivalent parts.

PROTECT THE ENVIRONMENT

Please dispose of packaging materials,

old machine components such as

batteries, hazardous fluids such as

antifreeze and oil, in a safe

environmentally way according to your

local waste disposal regulations.
Always remember to recycle.

MACHINE DATA

Please fill out at time of installation for future reference.

Model No.-

550E

Serial No.-

Machine Options --

Sales Rep. --

Sales Rep. phone no. --

Customer Number --

Installation Date --

Tennant Company

PO Box 1452

Minneapolis, MN 55440

Phone: (800) 553--8033 or (763) 523--2850

www.tennantco.com

SRS is a United States registered trademark of the Tennant Company.

Specifications and parts are subject to change without notice.

1986--1989, 1991--2002, 2005, 2006, 2010 TENNANT, Printed in U.S.A.

Summary of Contents for 550









































































































































































































Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands

Tennant 550, Manual

Search results

Summary of Contents for 550

Reviews:

Related manuals for 550

Brands by name

Popular brands