Televes 769501, User Manual

Page: 66 / 196

66
GPON ONT
Once the NAT, IGMP and Arping Settings are configured use Next button Figure 5-44, to progress to the next WAN Service setup - Routing Default
Gateway configuration window, Figure 5-48.
The actual default gateway configuration is presented in this window, with the ppp0.1 WAN interface previously configured shown as the default
Gateway interface. In the list of available WAN routed interfaces the veip0.2 used in this IPoE service configuration is shown, Figure 5-48, and can
be used to change/update default Routing Default Gateway current configuration.
Please refer to section 5.6.2.1.4 Routing Default Gateway Configuration, for the explanation of the configuration.
Figure 5-48: WAN Service setup - Routing Default Gateway configuration window
After default gateway interface configuration, use the Next button, Figure 5-48, to progress to the next WAN Service setup – DNS Server configu-
ration parameters window, Figure 5-49.
DNS table, as well as previously shown Routing table, is in accordance with current Default Gateway configuration, Figure 67: ppp0.1 is thus shown
as the current DNS server interface, but veip0.2 WAN interface is available for changing/updating DNS server interface if desired.
Please refer to section 5.6.2.1.5 DNS Server Configuration, for the explanation of the configuration.